Dwin 2 Instructions d'exploitation télécharger pdf (Page 30)

Ceiling Mount Kit Installation continued

4. Mount ceiling bracket “A” to the ceiling, making certain that the “FRONT”

label faces the screen.

5. Place bracket “B” inside bracket “A” and then secure the two pieces together

using the four hex head screws, making certain that the “FRONT” label faces

the screen.

6. Turn the projector upside down and place ceiling assembly C over the bot

tom of the projector, with the “FRONT” label facing toward the lens. NOTE:

DO NOT ATTEMPT TO LOOSEN THE FIVE HEX NUTS ON THE CEILING AS

SEMBLY “C”, THEY ARE SEALED!

7. Use provided four 0.4” countersink screws to attach the ceiling assembly

“C” to the projector.

8. Raise the assembly “C” and the Projector as a unit and hang from bracket

”B” by sliding two center side screws on bracket “B” into the “L” shaped

groove at the outer edges of the assembly “C” mounting bracket. Secure

the two assemblies together using the hex screws on the left and right sides

of the projector.

The projector is now suspended from the ceiling mount bracket.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

Pas de commentaire

Dwin 2 Instructions d'exploitation Page 30