Dwin 2 Instructions d'exploitation télécharger pdf (Page 39)

• Unstable Pixel – No unstable pixels.

DWIN Electronics will, at its option, either repair or replace the defect, or

replace the defective product or part thereof at no charge to the owner for parts

and labor covered by this warranty. If a unit is examined which is not in need

of repair, you will be charged for the examination and return shipping.

You must pay shipping charges incurred in getting your product to the

factory. We will pay the return shipping charges if the repairs are covered by

the warranty. Please save the original shipping carton. A charge will be made

for an additional carton.

If your product needs service, you should notify us at:

SERVICE DEPARTMENT

DWIN Electronics, Inc.

710 North Mariposa Street, Burbank CA 91506

Tel: ( 818 ) 239–1500, Fax: ( 818 ) 239–1506 E-mail: [email protected]

NOTE: You will need to present the original bill of sale to establish the

date of purchase.

Limited 90-Day Warranty – Projector Lamps

TransVision

™

4 lamps are rated for up to 2,000 hours of use during which the

lamp brightness may drop to 50 percent of the original brightness.

Actual projector lamp service life varies greatly depending upon several

factors such as duration of each projector session, frequency of on/off switch

ing, environmental conditions, presence of adequate projector ventilation, etc.

The speciﬁed 2000 hour lamp life rating is not guranteed in any way.

DWIN warrants its projector lamps for 90 days from the original date of

consumer purchase.

DWIN Electronics shall not be liable or in any way responsible for any inci

dental or consequential damages of any kind.

This warranty covers all defects in lamp material and workmanship for 90

days from the date of lamp or projector purchase with the following speciﬁc

exceptions. These are:

• damage caused by improper installation or adjustment;

• damage caused by accident, unreasonable use or neglect, speciﬁcally

if a projector is overheated due to an improperly ventilated cabinet or

secondary enclosure;

• damage from failure to follow instructions contained in your operating

instructions;

• damage from the performance of repairs by someone not authorized by

DWIN Electronics;

• any unit on which the serial number has been effaced, modified, or

removed;

• any failed lamp with a serial number that does not match the serial number

associated with the projector

1 2 ... 34 35 36 37 38 39 40 41 42 43

Commentaires sur ces manuels

Pas de commentaire

Dwin 2 Instructions d'exploitation Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données Dwin 2