Dwin 2 Instructions d'exploitation télécharger pdf (Page 34)

TransVision™ 4 RS-232 Control

The RS-232 interface for the TransVision

™

4 System can be operated from any

terminal, such as a Windows based PC running HyperTerminal.

Communication Port Set-Up Connector pin-out

Baud Rate: 9600 3 TX (Transmit Data)

Parity: none 2 RX (Receive Data)

Stop bits: 1 5 GND (Signal Ground)

Num. of bits: 8 bits

Flow control: none

Each command is enclosed in the

[ ] character envelope.

Note: Sequential commands must be separated with proper delays.

Any command followed by POWER ON must be delayed 10 seconds.

Any command followed by

INPUT SELECT must be delayed 1 second.

The following table lists the commands available:

[LH] Lamp Hours Transmits Lamp Hours in ASCII characters.

POWER CONTROL

[PON] Power on

[POFF] Power off

ASPECT RATIO SELECT

[S1] Standard (4:3)

[S2] Anamorphic or HD

[S3] Letterbox

[S4] Custom

RELAY CONTROL

[Y1ON] RY1 on

[Y1OFF] RY1 off

[Y2ON] RY2 on

[Y2OFF] RY2 off

INPUT SELECT

[I1] Video 1

[I2] Video 2

[I3] S-Video 1

[I4] S-Video 2

[I5] YCrCb 1

[I6] YCrCb 2

[I7] RGB 1

[I8] RGB 2

[I9] DVI 1

[I0] DVI 2

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 42 43

Commentaires sur ces manuels

Pas de commentaire

Dwin 2 Instructions d'exploitation Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données Dwin 2