Dwin 2 Instructions d'exploitation télécharger pdf (Page 11)

3. SWITCHED +12 VDC OUTPUTS

The TransVision

™

4 Processor has two switched +12 VDC outlets (2.5 mm DC

plug) labeled as RY1 and RY2. These outlets may be used to trigger a relay in

an electric device. Each output provides 100 ma DC current. See Relay Setup

menu for more details.

4. RGB INPUTS

The RGBS1 and RGBS2 inputs (D-sub 15) are provided for High-Deﬁnition (480p,

580p, 720p, 1080i) sources and computer graphics with VGA, SVGA, XGA, and

WXGA resolution. For computer graphics with VGA, SVGA, XGA, or WXGA it

is recommended to set the computer to 60 Hz vertical frequency.

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

1 Data 2- 10 Data 1+ 18 Data 0+

2 Data 2+ 11 Data 1 / Shield 19 Data 0 / Shield

3 Data 2 / Shield 14 +5V Power 22 Clock Shield

6 DDC Clock 15 Ground 23 Clock+

7 DDC Data 16 Hot Plug Detect 24 Clock-

9 Data 1- 17 Data 0-

The following are the pin assignments for the DVI-D connectors:

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

1 Red 6 Ground 11

2 Green 7 Ground 12

3 Blue 8 Ground 13 Horz. SYNC

4 9 Ground 14 Vert. SYNC

5 10 15

The following are the pin assignments for the D-sub 15 pin connector:

5. RS-232 COMPUTER INPUT

The RS-232C serial interface is provided for external control of the TransVision

™

4 from a central controller, such as a Home Theater control computer, Smart

Home automation system, etc.

For D-sub 9 pin connector pin-out and RS-232 command list, please refer

to “TransVision

™

4 RS-232 Control” section.

6. S-VIDEO INPUTS (S1, S2)

The S1 and S2 inputs are provided for NTSC (480i) or PAL (580i) video sources,

such as off-air tuners, satellite systems, cable boxes, SVHS VCR and DVD play

ers. S-Video inputs, instead of composite video inputs, are recommended for

use with DVD players and satellite systems.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 42 43

Pas de commentaire

Dwin 2 Instructions d'exploitation Page 11